How to maintain the fiber laser cutting machine in summer
In summer, the temperature rises in various places, and many fiber laser cutting equipment will generate heat during use, which will cause some failures. Therefore, in order to prevent the fiber laser cutting machine from malfunctioning in the summer, we must pay attention to the maintenance and repair of the fiber laser cutting machine. Here we have summarized 5 main points.
1. Avoid condensation
When summer is coming, the temperature is obviously rising, the humidity is heavy, the frequent rainfall and the humid environment can easily cause the internal condensation of the fiber laser cutting machine. Preventing fiber laser cutting machine condensation is the focus of laser maintenance. Don’t let this little detail ruin your fiber laser cutting machine.
The fiber laser source and the fiber laser cutting head are controlled by separate water cooling. It is recommended that the user set the laser low temperature and set the water temperature to about 26 degrees, and the cutting head and optical fiber to about 30 degrees (depending on the temperature and humidity values). Strictly follow the sequence of starting and closing in summer.
Pls kindly note:
Wet and hot weather will make the laser power supply and all parts of the laser equipment wet or dewed, this will lead to a variety of failures, thus seriously affect the normal production of users.The fault caused by improper maintenance for the above reasons does not belong to the normal warranty scope.
2. Maintain the cooling system and cooling water of the fiber laser cutting machine
The temperature rises in summer, and the cooling system working pressure of the fiber laser cutting machine increases. It is recommended to check and maintain the internal pressure of the water cooler before the high temperature. In summer, due to the high temperature, the deterioration rate of the cooling water will also increase. We suggest customers use regular distilled or deionized water to clean the scale of the water tank regularly and replace the water and filter (recommended that the replacement cycle should not exceed 15 days in summer), so as to avoid the adhesion of scale in the laser source and pipelines, which will affect the flow of cooling water and cause high temperature alarms. Please clean up the scale under professional guidance.
3. Rail maintenanceof fiber laser cutting machine
The guide rails of fiber laser cutting machine should be cleaned frequently to remove dust and other debris to ensure that the transmission part of the fiber laser cutting equipment is lubricated and free of debris. Clean and lubricate regularly to ensure that the fiber laser cutting machine can be accurately positioned during operation, achieve more accurate cutting, and improve product quality.
4. Control cabinet maintenance of fiber laser cutting machine
Since the dust of the fiber laser cutting machine is mainly metal powder, we recommend that the power is cut off regularly to clean the dust in the electrical cabinet of thefiber laser cutting machine and check the working condition of the cooling fan.
5. Fan cleaning of fiber laser cutting machine
Long-term use of the fan in the fiber laser cutting machine will cause a lot of solid dust to accumulate in the fan, causing the fan to generate a lot of noise, and it is not conducive to exhaust and deodorization. When the suction power of the fan is insufficient and the exhaust smoke is not smooth, the fan must be cleaned.
All in all, pay attention to the maintenance and repair of the fiber laser cutting machine is very important, this can help extend the use lifetime of fiber laser cutting machine, we suggest users all can keep in mind.