Laser Engraving And Cutting Machine&CNC Router Machine Solution
HomeAbout usNewsAttention on laser cutting

Attention on laser cutting

Time:Jan 14, 2016Author:April

Some customer ask Morn why they use the laser cutting machine to cut sample but the effection is not very good. Now let Morn introduction some suggestions of laser cutting.


1. For some material if the cutting speed too faster it will has sawtooth. 
2. Circular cutting speed is too fast, sometimes it will has small deformation. It is best choice that different graphics with different speeds.
3. If cutting the material comes out of the big smoke, it is best to use with air compressors, to prevent trimming yellow black, such as paper, wood, bamboo, PVC, PC ...
4. The silicone material is unsuitable for laser cutter. It is difficult to cut it will becomes powdery, but suitable for carving.
5. The general use of the machine power is no more than 50%, the current does not exceed the standard laser relatively long life expectancy.
6. Open pump and tank pumps before using the laser machine and turn off the pump and water tank before turning off the machine.
7. The detailed specification, installation and video operations in U disk.
8.Please change the water of water chiller, usually 15 days to 30 days
9. Regular (15-30 days) with anhydrous alcohol wipe mirrors and laser in advance of the gathering mirror, pay attention to clean and lubricate the machine guide, can consider using anti-rust oil
10. In the case of guaranteed vertical section, two inches of the lens maximum cutting thickness 15MM, 4. Maximum cutting thickness 35MM
11. Anti-color function you need to enable transparent and reflective material engraving.
12. Because of the thermal effect of laser material, the material will have a slit in the section at the time of cutting, because the size of the material is different, so we cut a material area we would be more


Morn has produced laser machine for many years, we have professional designer and technician in this area. Our Morn team is sunny and positive, we will try our best to offer each customer the best service. If you have any question about the CNC router or laser machine you can contract us directly. We will try our best to help you.


  1. Previous:Bangladesh customers reorder in Morn three times
  2. Next:Popular mixed laser cutting machine from Morn

FREESAMPLES

FREESOLUTIONS

©2016 Morn Technology.All Rights Reserved.Privacy PolicyTerms Of UseSitemapSitemap