Features：
1.Aluminum profile fixture worktable, there has 5cm distance from each fixture, along with 45 degree
funnel baffle under the worktable, to collect the fragment leak down from the fixture gap.
2. Three axis dust proof, Gantry mode movement, whole cast structure, Strong and long lifetime,
steady working without distortion, high precision.
3. Adopts Taiwan HIWIN square orbit transfer. The load-bearing surface with straight line guide
rail is a surface contact and the life is 2200 times longer than ordinary rails. Keep high precision
for long time and work strength.
4. Matches with the German double nut and ball bearing guide screw.(Y axis with double ball screw
to hold the machine loading).
5. Uses high torque/volume ratio and power/volume ratio, imported Japan Yaskawa servo motor with
low inertia and high rigidity Adoption of high-performance rare earth permanent magnet materials
reduces the consumption during motor running
6. Big power water cooled frequency spindle, which can ensure to work on hard material very well.
7. with good compatibility. This machine can work with many programs, such as Type3/artcarm/castmate/proe/Corelerow/CAD/CAM. The machine can do fine relief, 2D and 3D
products.
Technical parameters:
|
Model |
MT-CR6060 |
|
Machine body |
whole cast iron structure |
|
Work dimensions |
600×600mm |
|
Body dimensions |
800×1150×1200mm |
|
Z-axis working area |
100mm |
|
Cut thickness of material |
≤30mm |
|
Max.Speed |
6000mm/min |
|
Working speed |
0-4000mm/min |
|
Mechanical precision |
0.005mm |
|
Software |
Artcut,TYPE3,ARTCAM |
|
Max.Power consumption |
1800W |
|
Power source |
AC 220V/50Hz |
|
Driver type |
Japan Yaskawa motor |
|
Spindle |
2.2KW water cooled motor
(optional: change to 1.5KW,3KW) |
|
Spindle speed |
0-24,000rpm |
|
Blade diameter |
1-6mm |
|
Control system |
NC studio(computer control)/ DSP |
|
Command |
HPGL.G code,u00,mmg,plt |
Main parts:
Samples show:
For more information, pls contact us without hesitation.
|
