|
 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| · |
metal mould,rolling samples |
|
| · |
metal mould,rolling samples |
|
| · |
YAG laser marking samples |
|
| · |
paper,glass,plastic |
|
| · |
textile,leather,cloth |
|
| · |
stone,wood,metal |
|
| · |
rubber,plywood,photo |
|
|
 |
 |
|
|
Tel: |
0086-531-66982237 88692337 |
|
Fax: |
0086-531-88692337 |
|
Email: |
master@morntech.com
sales@morntech.com |
MornTech-USA |
|
Add:7475 Murray Dr # 8 |
|
Stockton:CA 95210,USA |
|
Phone #:(209)271-9818 |
|
Email:USAsales@morntech.com
USAinfo@morntech.com |
|
|
|
|
| Which does the laser engraving machine |
| Laser engraving machine carving lignin material computing technique - 1st, gradation performance The ordinary mechanical carving cannot carve the spot which by the economical way thick varies thin, thus does not have the gradation manifestation. The laser engraving machine is by arranges the way to realize the carving, has in the gradation performance aspect natural superiority. Therefore when carving design uses the gradation manifestation as far as possible, such advantage was an aspect reduced the coloring craft, saved the expense; On the other hand has enriched the carving performance method, increased the graph level. User when use, makes the graph in the different gradation to fill first (writing to transform first graph), the carving output choice black and white pattern, may try the different mesh point the effect, the precision surpasses 500dpi generally. 2nd, carving material Log (unfinished lumber) The wood is until now the most commonly used laser processing material, the large-scale engraving machine is very easy to carve and cutting. The tinted lumber likely white birch, the cherry or the gum are very easy by the laser gasification, thus quite suitable to carve. Each kind of lumber product label manufacture has own characteristic, some compact somewhat, if hardwood, in time carving or cutting must use the bigger laser power. We suggested that before carving not too familiar lumber, must first study the carving characteristic. Plywood Carves on the plywood with does not carve the too big difference actually on the lumber, only some point must pay attention, the carving depth cannot be too deep. After the cutting plywood edge will also look like the lumber such to become dark, if the key looked that the plywood will use that kind of lumber to make. Lumber carving Generally speaking, on the lumber carving usually is an intaglio, and the carving depth general request is deep. The such power general establishment is high, if after meeting the hard lumber will possibly cause the carving the graph color becomes deep. If wants to cause color shallow somewhat, may raise the carving speed, is trying multi-vulture several. Certain lumbers when carving will produce some lampblacks to be attached to the wood surface, if on the lumber has brushed has the paint available wet cloth to delete carefully it, if has not coated with lacquer will possibly scratch not cleanly, will create the end product surface damage. Lumber cutting The laser large-scale engraving machine cutting lumber's depth is not generally deep, the biggest cutting machine depth needs to read the wooden material and the laser power, if must cut the very thick lumber, may slow down the cutting speed, but will possibly create the lumber the combustion. When concrete operations may attempt uses the big specification lens, and uses redundant cutting the method. Coloration After lumber carving, generally will have one kind the feeling which will burn, will have one kind of primitive beauty of art with the wooden bottom color appropriate match, its color's depth will mainly look at the laser power and the carving speed. But some lumbers usually are the quality of material soft that kind, regardless of you are also how unable to change its color (for example white birch). To the end product coloration, may use the third thin pigment. |
|
|
|
|
|
