|
 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| · |
metal mould,rolling samples |
|
| · |
metal mould,rolling samples |
|
| · |
YAG laser marking samples |
|
| · |
paper,glass,plastic |
|
| · |
textile,leather,cloth |
|
| · |
stone,wood,metal |
|
| · |
rubber,plywood,photo |
|
|
 |
 |
|
|
Tel: |
0086-531-66982237 88692337 |
|
Fax: |
0086-531-88692337 |
|
Email: |
master@morntech.com
sales@morntech.com |
MornTech-USA |
|
Add:7475 Murray Dr # 8 |
|
Stockton:CA 95210,USA |
|
Phone #:(209)271-9818 |
|
Email:USAsales@morntech.com
USAinfo@morntech.com |
|
|
|
|
| machine laser head does not light Cause Analysis |
| Engraving machine laser head does not light the reasons for analysis:?????1, according to control panel Test button ammeter check whether the current view of the instructions, if not current, check the laser power supply is connected, high-voltage wire is loose or fall off, the signal wire is loose; if there is current, check the lens is broken, the laser tube Idemitsu Kong and the lens is pollution, light path is a serious shift.?????2, check the water circulation system is normal: unreasonable water, check the water pump is broken or not power; pass water, check the inlet, outlet is reversed or broken water pipes.?????3, fixed fire can be a light, computer-controlled carving without light, check the engraving machine control panel to the power of light even to connect.?????4, the laser power board is damaged. |
|
|
|
|
|
