MORN CNC router machine MT-C3030
1. Applicable area:
The metal engraving machine can be used to make metal mould such as aluminum-plastic composite panel ,sheet copper, thin aluminum sheet ,sheet iron plate and wood mould, art craft,dial,3D word ,PCB, stamp, relieve ,and signs.
2. Machine features:
a. This CNC router machine with English LCD, incoming stock width is 360mm, working area: 330 xs330mm, the engraving minimum letter is 1mm, doesn’t lose distortion, the engraving speed can reach 4200mm/m.
b. The features of this machine are that the engraving speed and height can be adjusted anytime, it is suited for any engraving software, support HPGL language, and the disturbing in flue of linear guide rail is very small
c. With user manual and warranty card, give engraving knife 13 pieces for free, the total power is 1.3KW, the working voltage is 220v.
d. soft ware:Type3 original with dongle / Wentai software
Main parameters:
|
model |
MT-C3030 |
|
Machine body |
whole cast with iron |
|
Work dimensions |
3030*300*60mm |
|
Body dimensions |
600×600×600mm |
|
Z-axis working area |
60mm |
|
Cut thickness of material |
≤30mm |
|
Max. speed |
6000mm/min |
|
Working speed |
0-4000mm/min |
|
Mechanical precision |
0.01mm |
|
Software |
Ucancam V9 software |
|
Power |
1500W |
|
Working voltage |
AC 220V/50Hz |
|
Drive type |
stepper motor |
|
Spindle |
1.5KW variable speed, water-cooled |
|
Spindle speed |
0-24,000rpm |
|
Blade diameter |
1-6mm |
|
Control system |
DSP handle controller |
|
Command |
HPGL. G code,u00,mmg,plt |
Machine samples:
 
For more information, please contact us directly.
MOR |
